Silicon-based electro-optic modulators contribute to easing the integration of high-speed and low-power consumption circuits for classical optical communications and data computations. Beyond the plasma dispersion modulation, an alternative solution in silicon is to exploit the DC Kerr effect, which generates an equivalent linear electro-optical effect enabled by applying a large DC electric field. Although some theoretical and experimental studies have shown its existence in silicon, limited contributions relative to plasma dispersion have been achieved in high-speed modulation so far. This paper presents high-speed optical modulation based on the DC Kerr effect in silicon PIN waveguides. The contributions of both plasma dispersion and Kerr effects have been analyzed in different waveguide configurations, and we demonstrated that the Kerr induced modulation is dominant when a high external DC electric field is applied in PIN waveguides. High-speed optical modulation response is analyzed, and eye diagrams up to 80 Gbit/s in NRZ format are obtained under a d.c. voltage of 30 V. This work paves the way to exploit the Kerr effect to generate high-speed Pockels-like optical modulation.

Near-infrared germanium (Ge) photodetectors monolithically integrated on top of silicon-on-insulator substrates are universally regarded as key enablers towards chip-scale nanophotonics, with applications ranging from sensing and health monitoring to object recognition and optical communications. In this work, we report on the high-data-rate performance pin waveguide photodetectors made of a lateral hetero-structured silicon-Ge-silicon (Si-Ge-Si) junction operating under low reverse bias at 1.55 μm. The pin photodetector integration scheme considerably eases device manufacturing and is fully compatible with complementary metal-oxide-semiconductor technology. In particular, the hetero-structured Si-Ge-Si photodetectors show efficiency-bandwidth products of ～9 GHz at ?1 V and ～30 GHz at ?3 V, with a leakage dark current as low as ～150 nA, allowing superior signal detection of high-speed data traffic. A bit-error rate of 10?9 is achieved for conventional 10 Gbps, 20 Gbps, and 25 Gbps data rates, yielding optical power sensitivities of ?13.85 dBm, ?12.70 dBm, and ?11.25 dBm, respectively. This demonstration opens up new horizons towards cost-effective Ge pin waveguide photodetectors that combine fast device operation at low voltages with standard semiconductor fabrication processes, as desired for reliable on-chip architectures in next-generation nanophotonics integrated circuits.